See What Ghost Immobiliser Problems Tricks The Celebs Are Using > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The ghost immobiliser near me Immobiliser

ghost immobiliser problems Immobiliser can safeguard your valuable property from theft. This system is discreet & does not require any additional key fobs to operate.

The device uses existing buttons in your vehicle (steering wheel, door panels & centre console) to create a unique changeable pin code sequence of up to 20 presses long. This will then authorize the startup of your vehicle.

Simple process to change the PIN code

Many owners are upgrading their security due to the rise in vehicle theft. There are a variety of security gadgets that are sold aftermarket including tracking systems, alarms and immobilisers. However, not all of them are equally effective in protecting your car. A tracking system may assist you in locating your car if it is stolen however, it won't stop the crime. Immobilisers, in contrast are exactly what they claim on the tin: they shut off your car's engine to prevent it from being started. The Autowatch Ghost is one of the most advanced options available, making it almost impossible for thieves steal your vehicle.

The Ghost 2 immobiliser device makes use of the buttons on your car to generate an unique sequence that needs to be entered to allow the engine to start. This can be accomplished by using the heater, window or indicator stalk buttons. In addition to this option, there is an app on mobile that acts as an emergency PIN code override and allows the driver to operate the car without using the button sequence. This option is particularly useful when you need to hand your car over to a valet service or parking since the immobiliser is activated, but not disabled.

The Ghost is an innovative and unique device that works by using the buttons on your vehicle rather than as a standalone unit. This means that it's not only a highly effective security measure against theft from your vehicle but also a transferable device onto any other vehicles you may have, making it more investment-wise than a traditional steering wheel lock.

Weatherproof tiny device

The Autowatch Ghost Immobiliser is an advanced security system that safeguards your pride & joy from key cloning and hacking. It also prevents ECU swapping. It is a tiny weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus, causing it to shut down the motor. It can be fitted into the vehicle without additional wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also indestructible to jamming devices which is the most common method used by car thieves to circumvent existing immobilisers.

The advantage of CAN data over traditional systems is that they operate silently. It is not able to be detected by sophisticated RF scanning and code-grabbing techniques as well as recognized by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators, but instead uses buttons in your vehicle, like the steering wheel, centre console or door panels, to create unique sequences for disarming. You can even create a sequence that is up to 20 presses long to provide additional security. The iPhone app allows only one connection, and comes with a unique pairing code for the Ghost. All communication between the two devices is protected.

The Ghost also prevents thieves from stealing the key to a new car or replacing the ECU to bypass the immobiliser and start the engine. The engine can only be started if a valid PIN code has been entered. It is also possible to put it into valet/service mode for a temporary operation (with defined parameters like a 30mph speed limit) to allow you to hand your car over to a valet service to be serviced without needing to enter a PIN code.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that is able to be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device is able to intercept signals and prevent your car from starting normally until you enter a specific code. The system can be turned on and off using your own smartphone app without the need for wires.

Standard factory immobilisers on vehicles function by using a transponder built into the key, which sends an electronic signal to the ECU. The car will begin to start if the correct code is transmitted. However, if the transponder from another vehicle is used instead, the immobiliser doesn't recognize it. This allows the vehicle to be started and stolen. A South African company that is at the forefront of vehicle safety systems technology created the ghost immobiliser for sale immobiliser. It guards you against hacking or key cloning and even key theft. The only way a thief could take your car is physically towing it away, and even then they wouldn't be capable of driving it.

Ghost utilizes the buttons of your vehicle, including the indicator stalk as well as the steering wheel and door panels to create a unique, changeable PIN code sequence that must be entered prior to you can use your car. This is done without extra hardware, such as a keyfob. It can take up 20 to 20 presses. It is also inaccessible to diagnostics equipment and doesn't transmit radio frequency signals so thieves cannot make use of sophisticated RF scanning or code grabbing techniques to discover that security systems have been installed.

Unlike physical anti-theft devices like clamps or wheel locks Ghost is hidden within the vehicle to ensure that it can't be taken away or disabled by thieves and is even more difficult to get rid of than a car alarm, which requires disarming via the use of a button sequence. This makes it a great complement to a GPS tracking device, which can be used to track your vehicle after it's stolen.

Override of emergency PIN code

You don't need to look too far on social media to find stories or even videos of vehicles that have been taken by car thieves using the most advanced technology tools available to them. This includes key-cloning devices and hacking tools that allow them to start the vehicle with your original keys.

Our Ghost immobiliser is specifically designed to prevent this, and give you an extra layer of security to protect your vehicle from being targeted by thieves. It works by creating an unique pin code push sequence using the buttons you have on the steering wheel, door panel, and centre console. The unique pin code must be entered together with your original key fob in order to prevent the vehicle from beginning. The unique override pin is found on a black plastic card that you receive following the installation. It is easy to remember since there aren't any LED indicators.

The device is hidden within the vehicle's wiring and doesn't emit any radio signals, so it isn't able to be detected by modern criminals using diagnostic software that can recognise what type of security system you have installed. This makes it an excellent alternative to a tracker.

In contrast to other security systems which rely on a relay in the engine bay, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to disable the vehicle completely by sending an electronic block of commands that is sent to both the ECU and the engine.

It is also possible to connect an analog immobiliser, alarm, or tracker with these systems, however this must be specified prior to installing the device. They also work with valet and service modes, and are is a great alternative to a tracking device when you take your car into the dealer for repairs to an electrical issue.

Service/Valet mode

In recent times, there has been a rise in the number of vehicles being stolen with the owners' keys. With easy access to key cloning equipment and door lock pick sets, it is now easier than ever for thieves to steal your pride and joy. We have developed the Autowatch Ghost Immobiliser to combat this. It prevents your car immobiliser ghost from being driven, even if your keys have been copied.

It connects directly to your car's ECU (Engine Control Unit) through the data loop of CAN. It's completely silent since it doesn't utilize radio frequencies or a key fob. This means it isn't detected by diagnostics or any other car hacking devices. It also protects against adding a new key or replacing the ECU to get around the system as only the correct PIN code will allow the engine to start.

The device is hidden within your car by using buttons on the steering wheel, centre console and door panels. A unique and changeable PIN code sequence that can be as long as 20 digits needs to be entered prior to being able to start your vehicle.

This is the first aftermarket CAN-bus immobiliser for the market that was developed. It can prevent your vehicle from being driven or started in the event that you do not enter a PIN number first. If the device is activated and you attempt to drive away, it will display an indication on your dash that will flash on a regular basis for approximately 300m. If you enter your PIN code at this point it will disarm the anti-hijack system and your vehicle will continue to drive as normal. If you don't enter your PIN code at this time the indication will continue to flash and will require a new PIN code for every attempt to start your vehicle.